SmartLinc Programing
DELETE A USER
The User Management Screen allows you to manage all users in lock
You must first access the MANAGER MENU by following the instructions.
1. hold Ok Button down till it shows Manager on screen press manager code ( if keys used insert key)
If a valid Manager code is entered, LCD will display “USERS ON/OFF”
2. Press OK button to access User Management
• Active users are shown with a fixed number (from 2 to 9).
3. Select and press the number for the User you wish to Delete (from 2 to 9).
4. The screen will show the USER ID number for the number you selected.
5. To move from the “DISABLE” screen to the “DELETE” screen, press the P button. Press OK to confirm deletion of user.
6. The LCD will display the “USERS ON/OFF” screen and show a “_” sign instead of the number of the newly deleted user.
7. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 5.
The User Management Screen allows you to manage all users in lock
You must first access the MANAGER MENU by following the instructions.
1. hold Ok Button down till it shows Manager on screen press manager code ( if keys used insert key)
If a valid Manager code is entered, LCD will display “USERS ON/OFF”
2. Press OK button to access User Management
• Active users are shown with a fixed number (from 2 to 9).
3. Select and press the number for the User you wish to Delete (from 2 to 9).
4. The screen will show the USER ID number for the number you selected.
5. To move from the “DISABLE” screen to the “DELETE” screen, press the P button. Press OK to confirm deletion of user.
6. The LCD will display the “USERS ON/OFF” screen and show a “_” sign instead of the number of the newly deleted user.
7. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 5.
INSTALL A USER
The User Management Screen allows you to manage all users in each lock
Access the MANAGER MENU by following the instructions.
1. Hold Ok Button down till it shows Manager on screen press manager code ( if keys used insert key)
• If a valid Manager Code is entered, LCD will display “USERS ON/OFF”
2. Press OK button to access User Management screen.
• Deleted or uninstalled users are shown with “_” sign in the number position (from 2 to 9).
3. Press the number for the deleted or uninstalled User to be installed (from 2 to 9).
4. The screen will show the USER ID number for the number selected. To confirm press OK button.
5. Enter the User’s NEW six (6) digit code two times (and insert eKeyII, if used).
• If a valid code is entered the LCD will display the “USERS ON/OFF” screen and show the number for the newly installed User.
If a mistake is made wait thirty (30) seconds until the unit powers off and repeat steps 1 - 5.
NOTE: If you accidentally enter a USER already installed, the display will show “USER ID = X, DISABLE?”
Press the “P” key to scroll back to the first menu.
• If the unit is set to Dual Code, the 2nd user will blink as though disabled until the user’s code has been changed from the default 6(2-2-2-2-2-2)
• If the unit is set for Time Delay Override, when the 9th user is installed, after the user code is entered, the unit will open rather than returning to the user’s ON/OFF screen.
The User Management Screen allows you to manage all users in each lock
Access the MANAGER MENU by following the instructions.
1. Hold Ok Button down till it shows Manager on screen press manager code ( if keys used insert key)
• If a valid Manager Code is entered, LCD will display “USERS ON/OFF”
2. Press OK button to access User Management screen.
• Deleted or uninstalled users are shown with “_” sign in the number position (from 2 to 9).
3. Press the number for the deleted or uninstalled User to be installed (from 2 to 9).
4. The screen will show the USER ID number for the number selected. To confirm press OK button.
5. Enter the User’s NEW six (6) digit code two times (and insert eKeyII, if used).
• If a valid code is entered the LCD will display the “USERS ON/OFF” screen and show the number for the newly installed User.
If a mistake is made wait thirty (30) seconds until the unit powers off and repeat steps 1 - 5.
NOTE: If you accidentally enter a USER already installed, the display will show “USER ID = X, DISABLE?”
Press the “P” key to scroll back to the first menu.
• If the unit is set to Dual Code, the 2nd user will blink as though disabled until the user’s code has been changed from the default 6(2-2-2-2-2-2)
• If the unit is set for Time Delay Override, when the 9th user is installed, after the user code is entered, the unit will open rather than returning to the user’s ON/OFF screen.
CHANGING YOUR BATTERY
1. Remove black plastic battery compartment cover (located at the bottom of the keypad) by gently pulling downward on its handle.
2. Allow the battery and its attached leads to drop down and out of the battery compartment. If it does not drop, gently pull on the battery until it does.
3. Remove the connector by unsnapping it from the two terminals on the top of the battery.
Never Pull on the Battery Leads
4. Connect a new 9-Volt Alkaline battery to the battery clip.
5. Push the battery and the leads completely up into the battery compartment.
6. Install the battery cover by placing one side of the cover in position and then pressing the other side into position with your finger.
WARNING: The port for the eKEYII is a data port only. Connecting power to this port will damage the system.
1. Remove black plastic battery compartment cover (located at the bottom of the keypad) by gently pulling downward on its handle.
2. Allow the battery and its attached leads to drop down and out of the battery compartment. If it does not drop, gently pull on the battery until it does.
3. Remove the connector by unsnapping it from the two terminals on the top of the battery.
Never Pull on the Battery Leads
4. Connect a new 9-Volt Alkaline battery to the battery clip.
5. Push the battery and the leads completely up into the battery compartment.
6. Install the battery cover by placing one side of the cover in position and then pressing the other side into position with your finger.
WARNING: The port for the eKEYII is a data port only. Connecting power to this port will damage the system.